Remanufacturing the Xerox Phaser 7700


By Tim Farrell, Faroudja Toner Technical


Xerox Phaser 7700 Cartridge


1.  The Xerox Phaser 7700 is an easy cartridge to remanufacture, as you do not need to work with any parts.  To begin remanufacturing, remove the cartridge from the printer; as you can see from the above picture, the cartridge is a long tube.

  Xerox Phaser 7700 Printer


2.  Remove the tape that seals the lid to the toner section of the cartridge.


3.  Remove the lid itself.


4 Clean out the toner section of the cartridge, taking care to remove any excess toner.


5 Refill the cartridge with toner and carrier.  NOTE:  Faroudja Toner Xerox 7700 bottles have toner and carrier mixed in each individual bottle, so be sure to shake each bottle well prior to pouring to ensure the toner and carrier are mixed.  


6Line up the arrow on the lid with the arrow on the cartridge.


7.  Seal the lid with tape.  Place the cartridge into the printer this completes the process.    


The technical staff of Faroudja Toner can be reached at 650-593-3862, or by visiting  You can also contact them by email by clicking here.








Copyright © 2005-present Faroudja Toner, All Rights Reserved.